episerveresmp Releases Rss Feed

Updated Release: ElencySolutions.MultipleProperty v1.6.3 (Oct 22, 2012)

croweman — Mon, 22 Oct 2012 09:33:09 GMT

The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London).

Installation notes

The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below:

Embedded:

<location path="util/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Non Embedded:

<location path="Templates/Plugins/Edit/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Release Notes

v1.6.3 - 22/10/2012

- Edit mode will no longer fall over with a 500 error when a multiple property points to an invalid VPP image.
- A new ToPresentationString() extension method is now available to render dynamic correctly within Xhtml string properties.

v1.6.1 - 03/08/2012

- Edit captions rather than property names will be shown in error messages.
- A new setting has been adding to the configuration to allow required field asterix's to be turned off.

v1.6 - 25/06/2012

- Added methods to allow entity and entities to be validated using custom code.

v1.5.1 - 01/05/2012

- Fixed issue where an editor was able to add more than the maximum number of entities if using copy as new.
- Added new IMultiplePropertyEntityAbilityOverride and IMultiplePropertyEntityCollectionAbilityOverride interfaces.

v1.5 - 26/04/2012

Some new properties have been added to the MultiplePropertyEntityAttribute:

- AllowAdd
- AllowEdit
- AllowDelete
- AllowSort

These new properties allow you to turn on/off various buttons and functionlity in list mode. The default for all of these properties is true.

A new property has been added to the MultiplePropertyEntityProperrtyAttribute.

- DefaultValue

This property allows you to define a default value for the property.

v1.4 - 15/03/2012

- When using list based properties, a copy button can be added to allow an editor to copy an existing item.
- There are now some configuration settings that can be defined to set defaults for whether the copy property button and copy list item buttons should appear.
- MultiplePropertyBase is now Serializable
- There was a bug when using link item collections where the state of the list was not being maintained during post backs which is now fixed.
- There was a bug when editing a multiple property list with child multiple property lists. When you edit one then click the add new button, the new item contained child list items from the previously edited item.

v1.3.5 - 06/01/2012

- Minor update to allow copy page to be locked down via location element in web.config

v1.3.4 - 20/12/2011

- When using lists and posting back required field asterix's were sometimes not shown, this is now fixed.

v1.3.3 - 28/11/2011

- Selected tab is now maintained on post backs.
- Access rights can be specified on tabs.
- Minor styling tweaks.

v1.3.2 - 16/11/2011

- Leaving page dialogs will no longer appear when page properties have been changed and the edit, delete or drag and drop sort functionality is used.

v1.3.1 - 03/11/2011

- Minimum number of entities can now be specified on entities.
- More options are available for setting property settings on entity properties.

Released: ElencySolutions.MultipleProperty v1.6.3 (Oct 22, 2012)

Mon, 22 Oct 2012 09:33:09 GMT

Created Release: ElencySolutions.MultipleProperty v1.6.3 (Oct 22, 2012)

croweman — Mon, 22 Oct 2012 09:18:47 GMT

Released: ElencySolutions.MultipleProperty v1.6.3 (Oct 22, 2012)

Mon, 22 Oct 2012 09:18:47 GMT

Created Release: ElencySolutions.MultipleProperty v1.6.2.1 (Oct 09, 2012)

croweman — Tue, 09 Oct 2012 07:15:04 GMT

The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London).

Installation notes

The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below:

Embedded:

<location path="util/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Non Embedded:

<location path="Templates/Plugins/Edit/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Release Notes

v1.6.2.1 - 09/10/2012

- Edit mode will no longer fall over with a 500 error when a multiple property points to an invalid VPP image.
- Dynamic content within XHTML properties will now render correctly in preview and published mode.

v1.6.1 - 03/08/2012

- Edit captions rather than property names will be shown in error messages.
- A new setting has been adding to the configuration to allow required field asterix's to be turned off.

v1.6 - 25/06/2012

- Added methods to allow entity and entities to be validated using custom code.

v1.5.1 - 01/05/2012

- Fixed issue where an editor was able to add more than the maximum number of entities if using copy as new.
- Added new IMultiplePropertyEntityAbilityOverride and IMultiplePropertyEntityCollectionAbilityOverride interfaces.

v1.5 - 26/04/2012

Some new properties have been added to the MultiplePropertyEntityAttribute:

- AllowAdd
- AllowEdit
- AllowDelete
- AllowSort

These new properties allow you to turn on/off various buttons and functionlity in list mode. The default for all of these properties is true.

A new property has been added to the MultiplePropertyEntityProperrtyAttribute.

- DefaultValue

This property allows you to define a default value for the property.

v1.4 - 15/03/2012

- When using list based properties, a copy button can be added to allow an editor to copy an existing item.
- There are now some configuration settings that can be defined to set defaults for whether the copy property button and copy list item buttons should appear.
- MultiplePropertyBase is now Serializable
- There was a bug when using link item collections where the state of the list was not being maintained during post backs which is now fixed.
- There was a bug when editing a multiple property list with child multiple property lists. When you edit one then click the add new button, the new item contained child list items from the previously edited item.

v1.3.5 - 06/01/2012

- Minor update to allow copy page to be locked down via location element in web.config

v1.3.4 - 20/12/2011

- When using lists and posting back required field asterix's were sometimes not shown, this is now fixed.

v1.3.3 - 28/11/2011

- Selected tab is now maintained on post backs.
- Access rights can be specified on tabs.
- Minor styling tweaks.

v1.3.2 - 16/11/2011

- Leaving page dialogs will no longer appear when page properties have been changed and the edit, delete or drag and drop sort functionality is used.

v1.3.1 - 03/11/2011

- Minimum number of entities can now be specified on entities.
- More options are available for setting property settings on entity properties.

v1.3 - 02/11/2011

- There was an issue where the multiple property lists were not working when the collection only had one item within composer. This release provides a solution to this.

The following code needs adding to the Global.asax.cs file:

protected void Application_PostMapRequestHandler(object sender, EventArgs e)
{
MultiplePropertyHelper.ConfigureForComposer();
}

- Minor layout issue fixes

Released: ElencySolutions.MultipleProperty v1.6.2.1 (Oct 09, 2012)

Tue, 09 Oct 2012 07:15:04 GMT

The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London).

Installation notes

The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below:

Embedded:

<location path="util/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Non Embedded:

<location path="Templates/Plugins/Edit/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Release Notes

v1.6.2.1 - 09/10/2012

- Edit mode will no longer fall over with a 500 error when a multiple property points to an invalid VPP image.
- Dynamic content within XHTML properties will now render correctly in preview and published mode.

v1.6.1 - 03/08/2012

- Edit captions rather than property names will be shown in error messages.
- A new setting has been adding to the configuration to allow required field asterix's to be turned off.

v1.6 - 25/06/2012

- Added methods to allow entity and entities to be validated using custom code.

v1.5.1 - 01/05/2012

- Fixed issue where an editor was able to add more than the maximum number of entities if using copy as new.
- Added new IMultiplePropertyEntityAbilityOverride and IMultiplePropertyEntityCollectionAbilityOverride interfaces.

v1.5 - 26/04/2012

Some new properties have been added to the MultiplePropertyEntityAttribute:

- AllowAdd
- AllowEdit
- AllowDelete
- AllowSort

These new properties allow you to turn on/off various buttons and functionlity in list mode. The default for all of these properties is true.

A new property has been added to the MultiplePropertyEntityProperrtyAttribute.

- DefaultValue

This property allows you to define a default value for the property.

v1.4 - 15/03/2012

- When using list based properties, a copy button can be added to allow an editor to copy an existing item.
- There are now some configuration settings that can be defined to set defaults for whether the copy property button and copy list item buttons should appear.
- MultiplePropertyBase is now Serializable
- There was a bug when using link item collections where the state of the list was not being maintained during post backs which is now fixed.
- There was a bug when editing a multiple property list with child multiple property lists. When you edit one then click the add new button, the new item contained child list items from the previously edited item.

v1.3.5 - 06/01/2012

- Minor update to allow copy page to be locked down via location element in web.config

v1.3.4 - 20/12/2011

- When using lists and posting back required field asterix's were sometimes not shown, this is now fixed.

v1.3.3 - 28/11/2011

- Selected tab is now maintained on post backs.
- Access rights can be specified on tabs.
- Minor styling tweaks.

v1.3.2 - 16/11/2011

- Leaving page dialogs will no longer appear when page properties have been changed and the edit, delete or drag and drop sort functionality is used.

v1.3.1 - 03/11/2011

- Minimum number of entities can now be specified on entities.
- More options are available for setting property settings on entity properties.

v1.3 - 02/11/2011

- There was an issue where the multiple property lists were not working when the collection only had one item within composer. This release provides a solution to this.

The following code needs adding to the Global.asax.cs file:

protected void Application_PostMapRequestHandler(object sender, EventArgs e)
{
MultiplePropertyHelper.ConfigureForComposer();
}

- Minor layout issue fixes

Created Release: ElencySolutions.MultipleProperty v1.6.2 (Oct 02, 2012)

croweman — Tue, 02 Oct 2012 08:47:34 GMT

The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London).

Installation notes

The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below:

Embedded:

<location path="util/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Non Embedded:

<location path="Templates/Plugins/Edit/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Release Notes

v1.6.2 - 02/10/2012

- Edit mode will no longer fall over with a 500 error when a multiple property points to an invalid VPP image.
- Dynamic content within XHTML properties will now render correctly in preview and published mode.

v1.6.1 - 03/08/2012

- Edit captions rather than property names will be shown in error messages.
- A new setting has been adding to the configuration to allow required field asterix's to be turned off.

v1.6 - 25/06/2012

- Added methods to allow entity and entities to be validated using custom code.

v1.5.1 - 01/05/2012

- Fixed issue where an editor was able to add more than the maximum number of entities if using copy as new.
- Added new IMultiplePropertyEntityAbilityOverride and IMultiplePropertyEntityCollectionAbilityOverride interfaces.

v1.5 - 26/04/2012

Some new properties have been added to the MultiplePropertyEntityAttribute:

- AllowAdd
- AllowEdit
- AllowDelete
- AllowSort

These new properties allow you to turn on/off various buttons and functionlity in list mode. The default for all of these properties is true.

A new property has been added to the MultiplePropertyEntityProperrtyAttribute.

- DefaultValue

This property allows you to define a default value for the property.

v1.4 - 15/03/2012

- When using list based properties, a copy button can be added to allow an editor to copy an existing item.
- There are now some configuration settings that can be defined to set defaults for whether the copy property button and copy list item buttons should appear.
- MultiplePropertyBase is now Serializable
- There was a bug when using link item collections where the state of the list was not being maintained during post backs which is now fixed.
- There was a bug when editing a multiple property list with child multiple property lists. When you edit one then click the add new button, the new item contained child list items from the previously edited item.

v1.3.5 - 06/01/2012

- Minor update to allow copy page to be locked down via location element in web.config

v1.3.4 - 20/12/2011

- When using lists and posting back required field asterix's were sometimes not shown, this is now fixed.

v1.3.3 - 28/11/2011

- Selected tab is now maintained on post backs.
- Access rights can be specified on tabs.
- Minor styling tweaks.

v1.3.2 - 16/11/2011

- Leaving page dialogs will no longer appear when page properties have been changed and the edit, delete or drag and drop sort functionality is used.

v1.3.1 - 03/11/2011

- Minimum number of entities can now be specified on entities.
- More options are available for setting property settings on entity properties.

v1.3 - 02/11/2011

- There was an issue where the multiple property lists were not working when the collection only had one item within composer. This release provides a solution to this.

The following code needs adding to the Global.asax.cs file:

protected void Application_PostMapRequestHandler(object sender, EventArgs e)
{
MultiplePropertyHelper.ConfigureForComposer();
}

- Minor layout issue fixes

Released: ElencySolutions.MultipleProperty v1.6.2 (Oct 02, 2012)

Tue, 02 Oct 2012 08:47:34 GMT

The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London).

Installation notes

The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below:

Embedded:

<location path="util/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Non Embedded:

<location path="Templates/Plugins/Edit/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Release Notes

v1.6.2 - 02/10/2012

- Edit mode will no longer fall over with a 500 error when a multiple property points to an invalid VPP image.
- Dynamic content within XHTML properties will now render correctly in preview and published mode.

v1.6.1 - 03/08/2012

- Edit captions rather than property names will be shown in error messages.
- A new setting has been adding to the configuration to allow required field asterix's to be turned off.

v1.6 - 25/06/2012

- Added methods to allow entity and entities to be validated using custom code.

v1.5.1 - 01/05/2012

- Fixed issue where an editor was able to add more than the maximum number of entities if using copy as new.
- Added new IMultiplePropertyEntityAbilityOverride and IMultiplePropertyEntityCollectionAbilityOverride interfaces.

v1.5 - 26/04/2012

Some new properties have been added to the MultiplePropertyEntityAttribute:

- AllowAdd
- AllowEdit
- AllowDelete
- AllowSort

These new properties allow you to turn on/off various buttons and functionlity in list mode. The default for all of these properties is true.

A new property has been added to the MultiplePropertyEntityProperrtyAttribute.

- DefaultValue

This property allows you to define a default value for the property.

v1.4 - 15/03/2012

- When using list based properties, a copy button can be added to allow an editor to copy an existing item.
- There are now some configuration settings that can be defined to set defaults for whether the copy property button and copy list item buttons should appear.
- MultiplePropertyBase is now Serializable
- There was a bug when using link item collections where the state of the list was not being maintained during post backs which is now fixed.
- There was a bug when editing a multiple property list with child multiple property lists. When you edit one then click the add new button, the new item contained child list items from the previously edited item.

v1.3.5 - 06/01/2012

- Minor update to allow copy page to be locked down via location element in web.config

v1.3.4 - 20/12/2011

- When using lists and posting back required field asterix's were sometimes not shown, this is now fixed.

v1.3.3 - 28/11/2011

- Selected tab is now maintained on post backs.
- Access rights can be specified on tabs.
- Minor styling tweaks.

v1.3.2 - 16/11/2011

- Leaving page dialogs will no longer appear when page properties have been changed and the edit, delete or drag and drop sort functionality is used.

v1.3.1 - 03/11/2011

- Minimum number of entities can now be specified on entities.
- More options are available for setting property settings on entity properties.

v1.3 - 02/11/2011

- There was an issue where the multiple property lists were not working when the collection only had one item within composer. This release provides a solution to this.

The following code needs adding to the Global.asax.cs file:

protected void Application_PostMapRequestHandler(object sender, EventArgs e)
{
MultiplePropertyHelper.ConfigureForComposer();
}

- Minor layout issue fixes

Updated Release: ElencySolutions.MultipleProperty v1.6.1 (Aug 03, 2012)

croweman — Fri, 03 Aug 2012 12:55:00 GMT

The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London).

Installation notes

The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below:

Embedded:

<location path="util/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Non Embedded:

<location path="Templates/Plugins/Edit/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Release Notes

v1.6.1 - 03/08/2012

- Edit captions rather than property names will be shown in error messages.
- A new setting has been adding to the configuration to allow required field asterix's to be turned off.

v1.6 - 25/06/2012

- Added methods to allow entity and entities to be validated using custom code.

v1.5.1 - 01/05/2012

- Fixed issue where an editor was able to add more than the maximum number of entities if using copy as new.
- Added new IMultiplePropertyEntityAbilityOverride and IMultiplePropertyEntityCollectionAbilityOverride interfaces.

v1.5 - 26/04/2012

Some new properties have been added to the MultiplePropertyEntityAttribute:

- AllowAdd
- AllowEdit
- AllowDelete
- AllowSort

These new properties allow you to turn on/off various buttons and functionlity in list mode. The default for all of these properties is true.

A new property has been added to the MultiplePropertyEntityProperrtyAttribute.

- DefaultValue

This property allows you to define a default value for the property.

v1.4 - 15/03/2012

- When using list based properties, a copy button can be added to allow an editor to copy an existing item.
- There are now some configuration settings that can be defined to set defaults for whether the copy property button and copy list item buttons should appear.
- MultiplePropertyBase is now Serializable
- There was a bug when using link item collections where the state of the list was not being maintained during post backs which is now fixed.
- There was a bug when editing a multiple property list with child multiple property lists. When you edit one then click the add new button, the new item contained child list items from the previously edited item.

v1.3.5 - 06/01/2012

- Minor update to allow copy page to be locked down via location element in web.config

v1.3.4 - 20/12/2011

- When using lists and posting back required field asterix's were sometimes not shown, this is now fixed.

v1.3.3 - 28/11/2011

- Selected tab is now maintained on post backs.
- Access rights can be specified on tabs.
- Minor styling tweaks.

v1.3.2 - 16/11/2011

- Leaving page dialogs will no longer appear when page properties have been changed and the edit, delete or drag and drop sort functionality is used.

v1.3.1 - 03/11/2011

- Minimum number of entities can now be specified on entities.
- More options are available for setting property settings on entity properties.

v1.3 - 02/11/2011

- There was an issue where the multiple property lists were not working when the collection only had one item within composer. This release provides a solution to this.

The following code needs adding to the Global.asax.cs file:

protected void Application_PostMapRequestHandler(object sender, EventArgs e)
{
MultiplePropertyHelper.ConfigureForComposer();
}

- Minor layout issue fixes

v1.2 - 28/09/2011

- Fixed issue where the copy property dialog did not work in commerce.
- Tab index can now be specified on custom multiple property tabs.
- Fixed issue with commerce properties that inherit property strings but do not set the edit

Released: ElencySolutions.MultipleProperty v1.6.1 (Aug 03, 2012)

Fri, 03 Aug 2012 12:55:00 GMT

The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London).

Installation notes

The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below:

Embedded:

<location path="util/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Non Embedded:

<location path="Templates/Plugins/Edit/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Release Notes

v1.6.1 - 03/08/2012

- Edit captions rather than property names will be shown in error messages.
- A new setting has been adding to the configuration to allow required field asterix's to be turned off.

v1.6 - 25/06/2012

- Added methods to allow entity and entities to be validated using custom code.

v1.5.1 - 01/05/2012

- Fixed issue where an editor was able to add more than the maximum number of entities if using copy as new.
- Added new IMultiplePropertyEntityAbilityOverride and IMultiplePropertyEntityCollectionAbilityOverride interfaces.

v1.5 - 26/04/2012

Some new properties have been added to the MultiplePropertyEntityAttribute:

- AllowAdd
- AllowEdit
- AllowDelete
- AllowSort

These new properties allow you to turn on/off various buttons and functionlity in list mode. The default for all of these properties is true.

A new property has been added to the MultiplePropertyEntityProperrtyAttribute.

- DefaultValue

This property allows you to define a default value for the property.

v1.4 - 15/03/2012

- When using list based properties, a copy button can be added to allow an editor to copy an existing item.
- There are now some configuration settings that can be defined to set defaults for whether the copy property button and copy list item buttons should appear.
- MultiplePropertyBase is now Serializable
- There was a bug when using link item collections where the state of the list was not being maintained during post backs which is now fixed.
- There was a bug when editing a multiple property list with child multiple property lists. When you edit one then click the add new button, the new item contained child list items from the previously edited item.

v1.3.5 - 06/01/2012

- Minor update to allow copy page to be locked down via location element in web.config

v1.3.4 - 20/12/2011

- When using lists and posting back required field asterix's were sometimes not shown, this is now fixed.

v1.3.3 - 28/11/2011

- Selected tab is now maintained on post backs.
- Access rights can be specified on tabs.
- Minor styling tweaks.

v1.3.2 - 16/11/2011

- Leaving page dialogs will no longer appear when page properties have been changed and the edit, delete or drag and drop sort functionality is used.

v1.3.1 - 03/11/2011

- Minimum number of entities can now be specified on entities.
- More options are available for setting property settings on entity properties.

v1.3 - 02/11/2011

- There was an issue where the multiple property lists were not working when the collection only had one item within composer. This release provides a solution to this.

The following code needs adding to the Global.asax.cs file:

protected void Application_PostMapRequestHandler(object sender, EventArgs e)
{
MultiplePropertyHelper.ConfigureForComposer();
}

- Minor layout issue fixes

v1.2 - 28/09/2011

- Fixed issue where the copy property dialog did not work in commerce.
- Tab index can now be specified on custom multiple property tabs.
- Fixed issue with commerce properties that inherit property strings but do not set the edit

Updated Release: ElencySolutions.MultipleProperty v1.6.1 (Aug 03, 2012)

croweman — Fri, 03 Aug 2012 12:54:36 GMT

The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London).

Installation notes

The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below:

Embedded:

<location path="util/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Non Embedded:

<location path="Templates/Plugins/Edit/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Release Notes

v1.6.1 - 03/08/2012

- Edit captions rather than property names will be shown in error messages.
- A new setting has been adding to the configuration to allow required field asterix's to be turned off.

v1.6 - 25/06/2012

- Added methods to allow entity and entities to be validated using custom code.

v1.5.1 - 01/05/2012

- Fixed issue where an editor was able to add more than the maximum number of entities if using copy as new.
- Added new IMultiplePropertyEntityAbilityOverride and IMultiplePropertyEntityCollectionAbilityOverride interfaces.

v1.5 - 26/04/2012

Some new properties have been added to the MultiplePropertyEntityAttribute:

- AllowAdd
- AllowEdit
- AllowDelete
- AllowSort

These new properties allow you to turn on/off various buttons and functionlity in list mode. The default for all of these properties is true.

A new property has been added to the MultiplePropertyEntityProperrtyAttribute.

- DefaultValue

This property allows you to define a default value for the property.

v1.4 - 15/03/2012

- When using list based properties, a copy button can be added to allow an editor to copy an existing item.
- There are now some configuration settings that can be defined to set defaults for whether the copy property button and copy list item buttons should appear.
- MultiplePropertyBase is now Serializable
- There was a bug when using link item collections where the state of the list was not being maintained during post backs which is now fixed.
- There was a bug when editing a multiple property list with child multiple property lists. When you edit one then click the add new button, the new item contained child list items from the previously edited item.

v1.3.5 - 06/01/2012

- Minor update to allow copy page to be locked down via location element in web.config

v1.3.4 - 20/12/2011

- When using lists and posting back required field asterix's were sometimes not shown, this is now fixed.

v1.3.3 - 28/11/2011

- Selected tab is now maintained on post backs.
- Access rights can be specified on tabs.
- Minor styling tweaks.

v1.3.2 - 16/11/2011

- Leaving page dialogs will no longer appear when page properties have been changed and the edit, delete or drag and drop sort functionality is used.

v1.3.1 - 03/11/2011

- Minimum number of entities can now be specified on entities.
- More options are available for setting property settings on entity properties.

v1.3 - 02/11/2011

- There was an issue where the multiple property lists were not working when the collection only had one item within composer. This release provides a solution to this.

The following code needs adding to the Global.asax.cs file:

protected void Application_PostMapRequestHandler(object sender, EventArgs e)
{
MultiplePropertyHelper.ConfigureForComposer();
}

- Minor layout issue fixes

v1.2 - 28/09/2011

- Fixed issue where the copy property dialog did not work in commerce.
- Tab index can now be specified on custom multiple property tabs.
- Fixed issue with commerce properties that inherit property strings but do not set the edit

Created Release: ElencySolutions.MultipleProperty v1.6 (Jun 25, 2012)

croweman — Mon, 25 Jun 2012 14:27:27 GMT

The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London).

Installation notes

The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below:

Embedded:

<location path="util/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Non Embedded:

<location path="Templates/Plugins/Edit/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Release Notes

v1.6 - 25/06/2012

- Added methods to allow entity and entities to be validated using custom code.

v1.5.1 - 01/05/2012

- Fixed issue where an editor was able to add more than the maximum number of entities if using copy as new.
- Added new IMultiplePropertyEntityAbilityOverride and IMultiplePropertyEntityCollectionAbilityOverride interfaces.

v1.5 - 26/04/2012

Some new properties have been added to the MultiplePropertyEntityAttribute:

- AllowAdd
- AllowEdit
- AllowDelete
- AllowSort

These new properties allow you to turn on/off various buttons and functionlity in list mode. The default for all of these properties is true.

A new property has been added to the MultiplePropertyEntityProperrtyAttribute.

- DefaultValue

This property allows you to define a default value for the property.

v1.4 - 15/03/2012

- When using list based properties, a copy button can be added to allow an editor to copy an existing item.
- There are now some configuration settings that can be defined to set defaults for whether the copy property button and copy list item buttons should appear.
- MultiplePropertyBase is now Serializable
- There was a bug when using link item collections where the state of the list was not being maintained during post backs which is now fixed.
- There was a bug when editing a multiple property list with child multiple property lists. When you edit one then click the add new button, the new item contained child list items from the previously edited item.

v1.3.5 - 06/01/2012

- Minor update to allow copy page to be locked down via location element in web.config

v1.3.4 - 20/12/2011

- When using lists and posting back required field asterix's were sometimes not shown, this is now fixed.

v1.3.3 - 28/11/2011

- Selected tab is now maintained on post backs.
- Access rights can be specified on tabs.
- Minor styling tweaks.

v1.3.2 - 16/11/2011

- Leaving page dialogs will no longer appear when page properties have been changed and the edit, delete or drag and drop sort functionality is used.

v1.3.1 - 03/11/2011

- Minimum number of entities can now be specified on entities.
- More options are available for setting property settings on entity properties.

v1.3 - 02/11/2011

- There was an issue where the multiple property lists were not working when the collection only had one item within composer. This release provides a solution to this.

The following code needs adding to the Global.asax.cs file:

protected void Application_PostMapRequestHandler(object sender, EventArgs e)
{
MultiplePropertyHelper.ConfigureForComposer();
}

- Minor layout issue fixes

v1.2 - 28/09/2011

- Fixed issue where the copy property dialog did not work in commerce.
- Tab index can now be specified on custom multiple property tabs.
- Fixed issue with commerce properties that inherit property strings but do not set the editor object.
- Minor UI bug fixed.

Released: ElencySolutions.MultipleProperty v1.6 (Jun 25, 2012)

Mon, 25 Jun 2012 14:27:27 GMT

The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London).

Installation notes

The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below:

Embedded:

<location path="util/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Non Embedded:

<location path="Templates/Plugins/Edit/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Release Notes

v1.6 - 25/06/2012

- Added methods to allow entity and entities to be validated using custom code.

v1.5.1 - 01/05/2012

- Fixed issue where an editor was able to add more than the maximum number of entities if using copy as new.
- Added new IMultiplePropertyEntityAbilityOverride and IMultiplePropertyEntityCollectionAbilityOverride interfaces.

v1.5 - 26/04/2012

Some new properties have been added to the MultiplePropertyEntityAttribute:

- AllowAdd
- AllowEdit
- AllowDelete
- AllowSort

These new properties allow you to turn on/off various buttons and functionlity in list mode. The default for all of these properties is true.

A new property has been added to the MultiplePropertyEntityProperrtyAttribute.

- DefaultValue

This property allows you to define a default value for the property.

v1.4 - 15/03/2012

- When using list based properties, a copy button can be added to allow an editor to copy an existing item.
- There are now some configuration settings that can be defined to set defaults for whether the copy property button and copy list item buttons should appear.
- MultiplePropertyBase is now Serializable
- There was a bug when using link item collections where the state of the list was not being maintained during post backs which is now fixed.
- There was a bug when editing a multiple property list with child multiple property lists. When you edit one then click the add new button, the new item contained child list items from the previously edited item.

v1.3.5 - 06/01/2012

- Minor update to allow copy page to be locked down via location element in web.config

v1.3.4 - 20/12/2011

- When using lists and posting back required field asterix's were sometimes not shown, this is now fixed.

v1.3.3 - 28/11/2011

- Selected tab is now maintained on post backs.
- Access rights can be specified on tabs.
- Minor styling tweaks.

v1.3.2 - 16/11/2011

- Leaving page dialogs will no longer appear when page properties have been changed and the edit, delete or drag and drop sort functionality is used.

v1.3.1 - 03/11/2011

- Minimum number of entities can now be specified on entities.
- More options are available for setting property settings on entity properties.

v1.3 - 02/11/2011

- There was an issue where the multiple property lists were not working when the collection only had one item within composer. This release provides a solution to this.

The following code needs adding to the Global.asax.cs file:

protected void Application_PostMapRequestHandler(object sender, EventArgs e)
{
MultiplePropertyHelper.ConfigureForComposer();
}

- Minor layout issue fixes

v1.2 - 28/09/2011

- Fixed issue where the copy property dialog did not work in commerce.
- Tab index can now be specified on custom multiple property tabs.
- Fixed issue with commerce properties that inherit property strings but do not set the editor object.
- Minor UI bug fixed.

Updated Release: ElencySolutions.MultipleProperty v1.5.1 (May 01, 2012)

croweman — Tue, 08 May 2012 12:27:26 GMT

The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London).

Installation notes

The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below:

Embedded:

<location path="util/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Non Embedded:

<location path="Templates/Plugins/Edit/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Release Notes

v1.5.1 - 01/05/2012

- Fixed issue where an editor was able to add more than the maximum number of entities if using copy as new.
- Added new IMultiplePropertyEntityAbilityOverride and IMultiplePropertyEntityCollectionAbilityOverride interfaces.

v1.5 - 26/04/2012

Some new properties have been added to the MultiplePropertyEntityAttribute:

- AllowAdd
- AllowEdit
- AllowDelete
- AllowSort

These new properties allow you to turn on/off various buttons and functionlity in list mode. The default for all of these properties is true.

A new property has been added to the MultiplePropertyEntityProperrtyAttribute.

- DefaultValue

This property allows you to define a default value for the property.

v1.4 - 15/03/2012

- When using list based properties, a copy button can be added to allow an editor to copy an existing item.
- There are now some configuration settings that can be defined to set defaults for whether the copy property button and copy list item buttons should appear.
- MultiplePropertyBase is now Serializable
- There was a bug when using link item collections where the state of the list was not being maintained during post backs which is now fixed.
- There was a bug when editing a multiple property list with child multiple property lists. When you edit one then click the add new button, the new item contained child list items from the previously edited item.

v1.3.5 - 06/01/2012

- Minor update to allow copy page to be locked down via location element in web.config

v1.3.4 - 20/12/2011

- When using lists and posting back required field asterix's were sometimes not shown, this is now fixed.

v1.3.3 - 28/11/2011

- Selected tab is now maintained on post backs.
- Access rights can be specified on tabs.
- Minor styling tweaks.

v1.3.2 - 16/11/2011

- Leaving page dialogs will no longer appear when page properties have been changed and the edit, delete or drag and drop sort functionality is used.

v1.3.1 - 03/11/2011

- Minimum number of entities can now be specified on entities.
- More options are available for setting property settings on entity properties.

v1.3 - 02/11/2011

- There was an issue where the multiple property lists were not working when the collection only had one item within composer. This release provides a solution to this.

The following code needs adding to the Global.asax.cs file:

protected void Application_PostMapRequestHandler(object sender, EventArgs e)
{
MultiplePropertyHelper.ConfigureForComposer();
}

- Minor layout issue fixes

v1.2 - 28/09/2011

- Fixed issue where the copy property dialog did not work in commerce.
- Tab index can now be specified on custom multiple property tabs.
- Fixed issue with commerce properties that inherit property strings but do not set the editor object.
- Minor UI bug fixed.

v1.1.1 - 09/06/2011:

- Fixed a bug where by the multiple property controls were not enabled when IsLanguageSpecific was set to true and it was a non master language branch version of the page.

Released: ElencySolutions.MultipleProperty v1.5.1 (May 01, 2012)

Tue, 08 May 2012 12:27:26 GMT

The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London).

Installation notes

The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below:

Embedded:

<location path="util/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Non Embedded:

<location path="Templates/Plugins/Edit/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Release Notes

v1.5.1 - 01/05/2012

- Fixed issue where an editor was able to add more than the maximum number of entities if using copy as new.
- Added new IMultiplePropertyEntityAbilityOverride and IMultiplePropertyEntityCollectionAbilityOverride interfaces.

v1.5 - 26/04/2012

Some new properties have been added to the MultiplePropertyEntityAttribute:

- AllowAdd
- AllowEdit
- AllowDelete
- AllowSort

These new properties allow you to turn on/off various buttons and functionlity in list mode. The default for all of these properties is true.

A new property has been added to the MultiplePropertyEntityProperrtyAttribute.

- DefaultValue

This property allows you to define a default value for the property.

v1.4 - 15/03/2012

- When using list based properties, a copy button can be added to allow an editor to copy an existing item.
- There are now some configuration settings that can be defined to set defaults for whether the copy property button and copy list item buttons should appear.
- MultiplePropertyBase is now Serializable
- There was a bug when using link item collections where the state of the list was not being maintained during post backs which is now fixed.
- There was a bug when editing a multiple property list with child multiple property lists. When you edit one then click the add new button, the new item contained child list items from the previously edited item.

v1.3.5 - 06/01/2012

- Minor update to allow copy page to be locked down via location element in web.config

v1.3.4 - 20/12/2011

- When using lists and posting back required field asterix's were sometimes not shown, this is now fixed.

v1.3.3 - 28/11/2011

- Selected tab is now maintained on post backs.
- Access rights can be specified on tabs.
- Minor styling tweaks.

v1.3.2 - 16/11/2011

- Leaving page dialogs will no longer appear when page properties have been changed and the edit, delete or drag and drop sort functionality is used.

v1.3.1 - 03/11/2011

- Minimum number of entities can now be specified on entities.
- More options are available for setting property settings on entity properties.

v1.3 - 02/11/2011

- There was an issue where the multiple property lists were not working when the collection only had one item within composer. This release provides a solution to this.

The following code needs adding to the Global.asax.cs file:

protected void Application_PostMapRequestHandler(object sender, EventArgs e)
{
MultiplePropertyHelper.ConfigureForComposer();
}

- Minor layout issue fixes

v1.2 - 28/09/2011

- Fixed issue where the copy property dialog did not work in commerce.
- Tab index can now be specified on custom multiple property tabs.
- Fixed issue with commerce properties that inherit property strings but do not set the editor object.
- Minor UI bug fixed.

v1.1.1 - 09/06/2011:

- Fixed a bug where by the multiple property controls were not enabled when IsLanguageSpecific was set to true and it was a non master language branch version of the page.

Updated Release: ElencySolutions.MultipleProperty v1.5.1 (May 01, 2012)

croweman — Tue, 08 May 2012 12:25:37 GMT

The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London).

Installation notes

The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below:

Embedded:

<location path="util/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Non Embedded:

<location path="Templates/Plugins/Edit/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Release Notes

v1.5.1 - 01/05/2012

- Fixed issue where an editor was able to add more than the maximum number of entities if using copy as new.
- Added new IMultiplePropertyEntityAbilityOverride and IMultiplePropertyEntityCollectionAbilityOverride interfaces.

v1.5 - 26/04/2012

Some new properties have been added to the MultiplePropertyEntityAttribute:

- AllowAdd
- AllowEdit
- AllowDelete
- AllowSort

These new properties allow you to turn on/off various buttons and functionlity in list mode. The default for all of these properties is true.

A new property has been added to the MultiplePropertyEntityProperrtyAttribute.

- DefaultValue

This property allows you to define a default value for the property.

v1.4 - 15/03/2012

- When using list based properties, a copy button can be added to allow an editor to copy an existing item.
- There are now some configuration settings that can be defined to set defaults for whether the copy property button and copy list item buttons should appear.
- MultiplePropertyBase is now Serializable
- There was a bug when using link item collections where the state of the list was not being maintained during post backs which is now fixed.
- There was a bug when editing a multiple property list with child multiple property lists. When you edit one then click the add new button, the new item contained child list items from the previously edited item.

v1.3.5 - 06/01/2012

- Minor update to allow copy page to be locked down via location element in web.config

v1.3.4 - 20/12/2011

- When using lists and posting back required field asterix's were sometimes not shown, this is now fixed.

v1.3.3 - 28/11/2011

- Selected tab is now maintained on post backs.
- Access rights can be specified on tabs.
- Minor styling tweaks.

v1.3.2 - 16/11/2011

- Leaving page dialogs will no longer appear when page properties have been changed and the edit, delete or drag and drop sort functionality is used.

v1.3.1 - 03/11/2011

- Minimum number of entities can now be specified on entities.
- More options are available for setting property settings on entity properties.

v1.3 - 02/11/2011

- There was an issue where the multiple property lists were not working when the collection only had one item within composer. This release provides a solution to this.

The following code needs adding to the Global.asax.cs file:

protected void Application_PostMapRequestHandler(object sender, EventArgs e)
{
MultiplePropertyHelper.ConfigureForComposer();
}

- Minor layout issue fixes

v1.2 - 28/09/2011

- Fixed issue where the copy property dialog did not work in commerce.
- Tab index can now be specified on custom multiple property tabs.
- Fixed issue with commerce properties that inherit property strings but do not set the editor object.
- Minor UI bug fixed.

v1.1.1 - 09/06/2011:

- Fixed a bug where by the multiple property controls were not enabled when IsLanguageSpecific was set to true and it was a non master language branch version of the page.

Updated Release: ElencySolutions.MultipleProperty v1.5.1 (May 01, 2012)

croweman — Tue, 01 May 2012 15:14:51 GMT

The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London).

Installation notes

The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below:

Embedded:

<location path="util/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Non Embedded:

<location path="Templates/Plugins/Edit/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Release Notes

v1.5.1 - 01/05/2012

- Fixed issue where an editor was able to add more than the maximum number of entities if using copy as new.
- Added new IMultiplePropertyEntityAbilityOverride and IMultiplePropertyEntityCollectionAbilityOverride interfaces.

v1.5 - 26/04/2012

Some new properties have been added to the MultiplePropertyEntityAttribute:

- AllowAdd
- AllowEdit
- AllowDelete
- AllowSort

These new properties allow you to turn on/off various buttons and functionlity in list mode. The default for all of these properties is true.

A new property has been added to the MultiplePropertyEntityProperrtyAttribute.

- DefaultValue

This property allows you to define a default value for the property.

v1.4 - 15/03/2012

- When using list based properties, a copy button can be added to allow an editor to copy an existing item.
- There are now some configuration settings that can be defined to set defaults for whether the copy property button and copy list item buttons should appear.
- MultiplePropertyBase is now Serializable
- There was a bug when using link item collections where the state of the list was not being maintained during post backs which is now fixed.
- There was a bug when editing a multiple property list with child multiple property lists. When you edit one then click the add new button, the new item contained child list items from the previously edited item.

v1.3.5 - 06/01/2012

- Minor update to allow copy page to be locked down via location element in web.config

v1.3.4 - 20/12/2011

- When using lists and posting back required field asterix's were sometimes not shown, this is now fixed.

v1.3.3 - 28/11/2011

- Selected tab is now maintained on post backs.
- Access rights can be specified on tabs.
- Minor styling tweaks.

v1.3.2 - 16/11/2011

- Leaving page dialogs will no longer appear when page properties have been changed and the edit, delete or drag and drop sort functionality is used.

v1.3.1 - 03/11/2011

- Minimum number of entities can now be specified on entities.
- More options are available for setting property settings on entity properties.

v1.3 - 02/11/2011

- There was an issue where the multiple property lists were not working when the collection only had one item within composer. This release provides a solution to this.

The following code needs adding to the Global.asax.cs file:

protected void Application_PostMapRequestHandler(object sender, EventArgs e)
{
MultiplePropertyHelper.ConfigureForComposer();
}

- Minor layout issue fixes

v1.2 - 28/09/2011

- Fixed issue where the copy property dialog did not work in commerce.
- Tab index can now be specified on custom multiple property tabs.
- Fixed issue with commerce properties that inherit property strings but do not set the editor object.
- Minor UI bug fixed.

v1.1.1 - 09/06/2011:

- Fixed a bug where by the multiple property controls were not enabled when IsLanguageSpecific was set to true and it was a non master language branch version of the page.

Released: ElencySolutions.MultipleProperty v1.5.1 (May 01, 2012)

Tue, 01 May 2012 15:14:51 GMT

The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London).

Installation notes

The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below:

Embedded:

<location path="util/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Non Embedded:

<location path="Templates/Plugins/Edit/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Release Notes

v1.5.1 - 01/05/2012

- Fixed issue where an editor was able to add more than the maximum number of entities if using copy as new.
- Added new IMultiplePropertyEntityAbilityOverride and IMultiplePropertyEntityCollectionAbilityOverride interfaces.

v1.5 - 26/04/2012

Some new properties have been added to the MultiplePropertyEntityAttribute:

- AllowAdd
- AllowEdit
- AllowDelete
- AllowSort

These new properties allow you to turn on/off various buttons and functionlity in list mode. The default for all of these properties is true.

A new property has been added to the MultiplePropertyEntityProperrtyAttribute.

- DefaultValue

This property allows you to define a default value for the property.

v1.4 - 15/03/2012

- When using list based properties, a copy button can be added to allow an editor to copy an existing item.
- There are now some configuration settings that can be defined to set defaults for whether the copy property button and copy list item buttons should appear.
- MultiplePropertyBase is now Serializable
- There was a bug when using link item collections where the state of the list was not being maintained during post backs which is now fixed.
- There was a bug when editing a multiple property list with child multiple property lists. When you edit one then click the add new button, the new item contained child list items from the previously edited item.

v1.3.5 - 06/01/2012

- Minor update to allow copy page to be locked down via location element in web.config

v1.3.4 - 20/12/2011

- When using lists and posting back required field asterix's were sometimes not shown, this is now fixed.

v1.3.3 - 28/11/2011

- Selected tab is now maintained on post backs.
- Access rights can be specified on tabs.
- Minor styling tweaks.

v1.3.2 - 16/11/2011

- Leaving page dialogs will no longer appear when page properties have been changed and the edit, delete or drag and drop sort functionality is used.

v1.3.1 - 03/11/2011

- Minimum number of entities can now be specified on entities.
- More options are available for setting property settings on entity properties.

v1.3 - 02/11/2011

- There was an issue where the multiple property lists were not working when the collection only had one item within composer. This release provides a solution to this.

The following code needs adding to the Global.asax.cs file:

protected void Application_PostMapRequestHandler(object sender, EventArgs e)
{
MultiplePropertyHelper.ConfigureForComposer();
}

- Minor layout issue fixes

v1.2 - 28/09/2011

- Fixed issue where the copy property dialog did not work in commerce.
- Tab index can now be specified on custom multiple property tabs.
- Fixed issue with commerce properties that inherit property strings but do not set the editor object.
- Minor UI bug fixed.

v1.1.1 - 09/06/2011:

- Fixed a bug where by the multiple property controls were not enabled when IsLanguageSpecific was set to true and it was a non master language branch version of the page.

Created Release: ElencySolutions.MultipleProperty v1.5.1 (May 01, 2012)

croweman — Tue, 01 May 2012 07:52:09 GMT

The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London).

Installation notes

The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below:

Embedded:

<location path="util/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Non Embedded:

<location path="Templates/Plugins/Edit/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Release Notes

v1.5.1 - 01/05/2012

- Fixed issue where an editor was able to add more than the maximum number of entities if using copy as new.
- Added new IMultiplePropertyEntityAbilityOverride and IMultiplePropertyEntityCollectionAbilityOverride interface.

v1.5 - 26/04/2012

Some new properties have been added to the MultiplePropertyEntityAttribute:

- AllowAdd
- AllowEdit
- AllowDelete
- AllowSort

These new properties allow you to turn on/off various buttons and functionlity in list mode. The default for all of these properties is true.

A new property has been added to the MultiplePropertyEntityProperrtyAttribute.

- DefaultValue

This property allows you to define a default value for the property.

v1.4 - 15/03/2012

- When using list based properties, a copy button can be added to allow an editor to copy an existing item.
- There are now some configuration settings that can be defined to set defaults for whether the copy property button and copy list item buttons should appear.
- MultiplePropertyBase is now Serializable
- There was a bug when using link item collections where the state of the list was not being maintained during post backs which is now fixed.
- There was a bug when editing a multiple property list with child multiple property lists. When you edit one then click the add new button, the new item contained child list items from the previously edited item.

v1.3.5 - 06/01/2012

- Minor update to allow copy page to be locked down via location element in web.config

v1.3.4 - 20/12/2011

- When using lists and posting back required field asterix's were sometimes not shown, this is now fixed.

v1.3.3 - 28/11/2011

- Selected tab is now maintained on post backs.
- Access rights can be specified on tabs.
- Minor styling tweaks.

v1.3.2 - 16/11/2011

- Leaving page dialogs will no longer appear when page properties have been changed and the edit, delete or drag and drop sort functionality is used.

v1.3.1 - 03/11/2011

- Minimum number of entities can now be specified on entities.
- More options are available for setting property settings on entity properties.

v1.3 - 02/11/2011

- There was an issue where the multiple property lists were not working when the collection only had one item within composer. This release provides a solution to this.

The following code needs adding to the Global.asax.cs file:

protected void Application_PostMapRequestHandler(object sender, EventArgs e)
{
MultiplePropertyHelper.ConfigureForComposer();
}

- Minor layout issue fixes

v1.2 - 28/09/2011

- Fixed issue where the copy property dialog did not work in commerce.
- Tab index can now be specified on custom multiple property tabs.
- Fixed issue with commerce properties that inherit property strings but do not set the editor object.
- Minor UI bug fixed.

v1.1.1 - 09/06/2011:

- Fixed a bug where by the multiple property controls were not enabled when IsLanguageSpecific was set to true and it was a non master language branch version of the page.

Released: ElencySolutions.MultipleProperty v1.5.1 (May 01, 2012)

Tue, 01 May 2012 07:52:09 GMT

The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London).

Installation notes

The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below:

Embedded:

<location path="util/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Non Embedded:

<location path="Templates/Plugins/Edit/ElencySolutionsMultipleProperty">
<system.web>
<authorization>
<allow roles="WebEditors" />
<deny users="*" />
</authorization>
</system.web>
</location>

Release Notes

v1.5.1 - 01/05/2012

- Fixed issue where an editor was able to add more than the maximum number of entities if using copy as new.
- Added new IMultiplePropertyEntityAbilityOverride and IMultiplePropertyEntityCollectionAbilityOverride interface.

v1.5 - 26/04/2012

Some new properties have been added to the MultiplePropertyEntityAttribute:

- AllowAdd
- AllowEdit
- AllowDelete
- AllowSort

These new properties allow you to turn on/off various buttons and functionlity in list mode. The default for all of these properties is true.

A new property has been added to the MultiplePropertyEntityProperrtyAttribute.

- DefaultValue

This property allows you to define a default value for the property.

v1.4 - 15/03/2012

- When using list based properties, a copy button can be added to allow an editor to copy an existing item.
- There are now some configuration settings that can be defined to set defaults for whether the copy property button and copy list item buttons should appear.
- MultiplePropertyBase is now Serializable
- There was a bug when using link item collections where the state of the list was not being maintained during post backs which is now fixed.
- There was a bug when editing a multiple property list with child multiple property lists. When you edit one then click the add new button, the new item contained child list items from the previously edited item.

v1.3.5 - 06/01/2012

- Minor update to allow copy page to be locked down via location element in web.config

v1.3.4 - 20/12/2011

- When using lists and posting back required field asterix's were sometimes not shown, this is now fixed.

v1.3.3 - 28/11/2011

- Selected tab is now maintained on post backs.
- Access rights can be specified on tabs.
- Minor styling tweaks.

v1.3.2 - 16/11/2011

- Leaving page dialogs will no longer appear when page properties have been changed and the edit, delete or drag and drop sort functionality is used.

v1.3.1 - 03/11/2011

- Minimum number of entities can now be specified on entities.
- More options are available for setting property settings on entity properties.

v1.3 - 02/11/2011

- There was an issue where the multiple property lists were not working when the collection only had one item within composer. This release provides a solution to this.

The following code needs adding to the Global.asax.cs file:

protected void Application_PostMapRequestHandler(object sender, EventArgs e)
{
MultiplePropertyHelper.ConfigureForComposer();
}

- Minor layout issue fixes

v1.2 - 28/09/2011

- Fixed issue where the copy property dialog did not work in commerce.
- Tab index can now be specified on custom multiple property tabs.
- Fixed issue with commerce properties that inherit property strings but do not set the editor object.
- Minor UI bug fixed.

v1.1.1 - 09/06/2011:

- Fixed a bug where by the multiple property controls were not enabled when IsLanguageSpecific was set to true and it was a non master language branch version of the page.